And Ultrasonic Cleaning And Drying Equipment For Automotive And Electronic Industries
Working process:
Loading → Aerated pickling and rust removal → Ultrasonic chemical cleaning → Ultrasonic chemical cleaning → Ultrasonic water cleaning → Ultrasonic water cleaning + dehydration → Hot air drying → Hot air drying → Unloading.
The ultrasonic cleaning and drying equipment for the automotive and electronic industries has the following characteristics:
I. Efficient cleaning
Utilizing the cavitation effect of ultrasonic waves, a large number of tiny bubbles are generated in the cleaning liquid.
These bubbles release powerful energy at the moment of rupture, which can effectively remove dirt, oil stains, dust and other impurities on the
surfaces of automotive and electronic parts, and the cleaning effect is remarkable. Compared with traditional cleaning methods, ultrasonic
cleaning is faster and can greatly improve production efficiency.
II. Deep cleaning
Ultrasonic waves can penetrate tiny gaps and blind holes to deeply clean the complex structure inside the car engine and the
subtle parts of the electronic circuit board to ensure that all parts of the parts can be thoroughly cleaned. For some difficult-to-clean parts, such
as car fuel injectors and the pins of electronic chips, ultrasonic cleaning and drying equipment can exert unique advantages.
III. Non-destructive cleaning
Ultrasonic cleaning is a non-contact cleaning method that will not cause mechanical damage to automotive and
electronic parts and can maintain the original precision and surface quality of the parts. It is especially suitable for cleaning some precision
automotive sensors, electronic components, etc., avoiding damage caused by improper cleaning.
IV. Thorough drying
The equipment is equipped with an efficient drying system that can quickly remove the moisture on the surface of parts
after cleaning to ensure thorough drying and prevent rust and corrosion. Adopting advanced drying technologies such as hot air circulation and
infrared heating can quickly improve drying efficiency and shorten drying time.
V. High degree of automation
The ultrasonic cleaning and drying equipment for the automotive and electronic industries usually has an automatic control system, which can
realize fully automated operation of the cleaning and drying processes, reduce manual intervention, and improve production efficiency and
stability. Program settings can be made according to different cleaning needs to realize personalized cleaning schemes.
VI. Energy saving and environmental protection
During the ultrasonic cleaning process, only a small amount of cleaning liquid is needed.
Compared with traditional cleaning methods, a large amount of water resources and cleaning agents can be saved. The energy consumption
of the equipment is low and meets the requirements of energy saving and environmental protection.
VII. Strong adaptability
It can be applied to the cleaning of automotive and electronic parts of different shapes, sizes and materials, and has wide applicability. It can
meet the cleaning needs of different production links such as automobile manufacturing and electronic assembly.
Equipment Parameters:
Tank Body
Structure | Internal effective size | Inner tank size: L2600×W1400×H500mm
Approximate overall size: L2850W1650H750mm (subject to the actual size) |
| Heating method | Electric heating 12KW |
| Material | The inner tank adopts "SUS304" 2.5mm Zhangjiagang Posco stainless steel plate.
The non-radiating surface adopts SUS304 T = 2.0mm, and the outer door panel adopts 1.0mm stainless steel. |
| Outer frame of the cleaning tank | It is fabricated by welding stainless steel 40401.5 square tubes, with a sturdy and durable structure. |
| Structure | The ultrasonic transducers are adhered to the bottom of the tank (bottom vibration type), and four corner wheels are configured at the bottom. |
| Ultrasonic transducer | Adopt imported wafer transducers of "HESEN" brand and imported bonding technology. The total number of ultrasonic transducers is 200, with a frequency of 28KHZ and 60W each. |
| | Total ultrasonic power | 12KW |
| | Time control | It is built-in in the generator and the time is adjustable from 0 to 999 minutes. |
| Power supply system | Ultrasonic generator | The generator adopts 4 sets of internationally leading IGBT modules and power tubes for control to ensure strong and stable output power. Xiantai's unique sweeping frequency technology ensures no dead corners in cleaning.
It has functions such as continuously adjustable power, sweeping frequency, timing adjustment, start/stop, etc. |
| Component part | All are imported high-quality components. |
| Other | | Configure a dedicated control box rack. There are two independent generators placed on the control box rack.
The ultrasonic power cord is 3 meters long. |
| After-sales服务sevre | Transport | |
| The equipment is warranted for one year and maintained for life. |
Product Tags:
|
|
Ultrasonic Cleaning And Drying Equipment For Automotive And Electronic Industries Images
|
